To Next PageTo Next Page
Need help?Do you have a question about the Alpine 7516MM and is the answer not in the manual?
General| Type | Car Receiver |
|---|---|
| Display Type | LCD |
| Power Output | 50W x 4 |
| Radio Tuner | AM/FM |
| Bass control | Yes |
| Treble control | Yes |
| Fader | Yes |
| Balance | Yes |
| Display Illumination | Yes |
| Removable Radio Face | Yes |
| Channels | 4 |
| CD Player | No |
| Anti-Theft | Yes |
| Preamp Outputs | Yes |
Technical specifications for FM reception.
Technical specifications for MW reception.
Technical specifications for LW reception.
Technical specifications for tape playback performance.
Identification of unit controls and indicators.
Identification of controls and indicators for the 7516L model.
Diagram showing all electrical connections.
How to tune radio stations using seek and manual methods.
Storing and recalling radio stations using memory and D.A.P.
Inserting, playing, stopping tapes, and using Dolby B NR.
First-time CD setup and standard playback.
Setup for FM radio adjustments.
Detailed steps for FM alignment.
Setup and steps for SDK function adjustments.
Procedures for SK, DK, and output level adjustments.
Setup and steps for tape player alignment.
Procedures for tape head, Dolby, and speed alignment.
General conditions and specifications for electrical testing.
Requirements for power, impedance, signal generator, and controls.
Detailed tests for FM reception performance.
FM tone/loudness tests and MW/LW inspection procedures.
Tests for SDK and tape player performance metrics.
Procedures to check all unit functions.
Verifying operation across all modes.
Part 1 of 4 circuit diagrams.
Part 2 of 4 circuit diagrams.
Part 3 of 4 circuit diagrams.
Part 4 of 4 circuit diagrams.
