12-EN
Using the Front AUX Input Terminal
Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
Press SOURCE/, and select the AUX mode to listen to
the portable device.
TUNER DISC USB AUDIO/iPod AUX TUNER*
1
*
1
Displayed only when the iPod/iPhone is connected.
You can flexibly customize the unit to suit your own preferences and
usage.
1
Press SETUP to activate the SETUP mode.
2
Turn the Rotary encoder to select the desired
SETUP menu, and then press the Rotary encoder
or j/r/ENT.
(e.g. Select PLAY MODE)
PLAY MODE AUX NAME DEMO
SUBW SYS PLAY MODE
3
Turn the Rotary encoder to change the setting.
(e.g. Select CD-DA or CDDA/MP3).
4
Press SETUP to return to normal mode.
•
•
• Press and hold /ESC for at least 2 seconds can also return to
normal mode.
Press /MUTE to return to the previous mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Portable player, etc.
Main unit
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs)
or
SETUP
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
Playing MP3/WMA/AAC Data (PLAY MODE)
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
CD-DA (Initial setting) / CDDA/MP3
CD-DA: Only the CD data in Session 1 can be played back.
CDDA/MP3: CD data, MP3/WMA/AAC files in mixed mode, and
multi-session discs can be played back.
About “Text”
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
• Some characters may not be displayed correctly with this device,
depending on the character type.
“NO SUPPORT” is displayed when the desired text information
cannot be displayed on this unit.
The text or tag information may not be correctly displayed,
depending on the contents.
•
•
Rotary encoder
j/r/ENT
/MUTE
SETUP
SOURCE/
/ESC
To Next Page
Loading...
Need help?
General
