Alpine CDE-141 User Manual

25-EN
• A copy-protected WMA file was played back.
– You can only play back non-copy-protected files.
• The iPod/iPhone is not connected.
– Make sure the iPod/iPhone is correctly connected (Refer to
“Connecting an iPod/iPhone” on page 20).
Make sure the cable is not bent excessively.
• There are no songs in the iPod/iPhone.
– Download songs to the iPod/iPhone and connect to this unit.
• Communication error
– Turn the ignition key off, and then set to ON again.
– Reset the iPod.
– Check the display by reconnecting between the iPod/iPhone and
this unit, using the iPod/iPhone cable.
• Caused by the iPod/iPhone Software Version not being compatible
with this unit.
– Update the iPod/iPhone Software Version to be compatible with
this unit.
• The iPod/iPhone is not verified.
– Reset the iPod.
– Try another iPod/iPhone, if available.
• Power surge error
Excessive voltage/current is supplied to the iPod/iPhone.
– Try another iPod/iPhone, if available.
Indication for iPod Mode (CDE-141 only)

Alpine CDE-141 Specifications

General

Power Output	50W x 4
RMS Power Output	18W x 4
Tuner	AM/FM
CD Playback	Yes
MP3 Playback	Yes
WMA Playback	Yes
AAC Playback	Yes
USB Input	Yes
Bluetooth	No
Preamp Voltage	2V
Display Type	LCD
Button Illumination	Red
AUX Input	Yes
Detachable Face	Yes
Remote Control	Optional
Channels	4