34
English
Remote Control
Operation
If you encounter a problem, please review the
items in the following checklist. This guide will
help you isolate the problem if the unit is at
fault. Otherwise, make sure the rest of your
system is properly connected or consult your
authorized Alpine dealer.
Symptom
No function or display.
Cause and Solution
• Car's ignition is off.
– If connected following instructions, the
unit will not operate with the car's ignition
off.
• Improper power lead connections.
– Check power lead connections.
• Blown fuse.
– Check the fuses on the battery leads;
replace with the proper value if neces-
sary.
English
In Case of
Difficulty
Initial Turn-On After Installation
To Next Page
