Alpine iDE-178BT User Manual

23-EN
Notes
• HPF (high pass filter): Cuts the lower frequencies and allows the higher
frequencies to pass.
• LPF (low pass filter): Cuts the higher frequencies and allows the lower
frequencies to pass.
• Slope: The level change (in dB) for a frequency change of one octave.
• The higher the slope value, the steeper the slope becomes.
• Adjust the slope to Flat to bypass the HP or LP filters.
• Do not use a tweeter without the HPF on or set to a low frequency, as it
may cause damage to the speaker due to the low frequency content.
• You cannot adjust the crossover frequency higher than the HPF or lower
than the LPF.
• Adjustment should be made according to the recommended crossover
frequency of the connected speakers. Determine the recommended
crossover frequency of the speakers. Adjusting to a frequency range
outside that recommended may cause damage to the speakers.
For the recommended crossover frequencies of Alpine speakers, refer to
the respective Owner’s Manual.
We are not responsible for damage or malfunction of speakers caused by
using the crossover outside the recommended value.
Displaying the Text
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc. while playing
MP3/WMA/AAC files.
Press VIEW.
The display will change every time the button is pressed.
Note
• When the Text Scroll is set to Manual (refer to “Scroll Setting (Text
Scroll)” on page 29), press and hold VIEW for at least 2 seconds, the
current text will be scrolled one time (except Radio mode).
The display in Radio mode:
If there is PS (Programme Service Name)
If there is no PS (Programme Service Name)
Low range
High range
(Dierent from actual display)
Level adjusting
(0 to −12 dB)
Output frequency range
Slope Flat
Slope adjusting
20 Hz
(Dierent from actual display)
HPF cut-o
frequency
LPF cut-o
frequency
Other Functions
SOURCE
/ENTER/OPTION

VIEW
/ II
FAV(CDE-175R Only)
Rotary encoder
Artist NamePS (Programme Service Name)
*1
Song Name(Blank)
Calendar
PS (Programme Service Name)
*1
PTY (Programme Type)
Clock
Radio Text
PS (Programme Service Name)
*1
(Blank)
(Blank)
Artist Name
FREQUENCY
Song Name
Calendar
FREQUENCY
Clock
PTY (Programme Type)
Radio Text
FREQUENCY
(Blank)

Alpine iDE-178BT Specifications

General

MP3 playback	Yes
Audio formats supported	AAC, MP3, WMA
Video formats supported	M-JPEG
FM band range	87.5 - 108 MHz
LW band range	531 - 281 kHz
Supported radio bands	FM, LW, MW
Preset stations quantity	30
Output power	200 W
Product color	Black
Disc types supported	CD-R, CD-RW
Display type	LCD
On Screen Display (OSD) languages	DEU, DUT, ESP, FRE, ITA, RUS
Bluetooth version	2.1+EDR
Bluetooth profiles	A2DP, AVRCP, HFP, HSP, SSP
Headphone connectivity	3.5mm
Compatible products	iPod touch 4th/3rd/2nd/1st Gen., iPod nano 6th/5th/4th/3rd/2nd/1st Gen., iPod classic 160GB/120GB/80GB, iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone
Key illumination color	Multi
Battery capacity	1000 mAh

Weight and Dimensions

Weight	1100 g
Dimensions (WxDxH)	178 x 50 x 162 mm