Alpine iLX-F509 - iPod and SiriusXM Operation

24-EN
Adjusting the OEM SiriusXM Volume
Setting item:
Volume Adjust
Setting level:
-14 to +14 (Initial setting: 0)
Touch [ ] or [ ] of “Volume Adjust” to set the
factory SiriusXM volume level.
Setting the OEM Media
Set to [On] when operating factory media (USB Audio/iPod
Audio) on the unit.
Setting item:
OEM Media
Touch [ ] (Off) or [ ] (On) of “OEM
Media”.
Adjusting the OEM Media Volume
Setting item:
Volume Adjust
Setting level:
-14 to +14 (Initial setting: 0)
Touch [ ] or [ ] of “Volume Adjust” to set the
factory media volume level.
Setting the Media
The Media setting can be changed for the connected
iDataLink module.
Setting item:
Media Setup
• This setting is only available when the iDataLink Maestro®
module (sold separately) is connected.
• Depending on the iDataLink module, this setting item may
not be displayed or the setting contents may differ.
Setting the Maestro Module
The Maestro Module setting can be changed for the
connected iDataLink module.
Setting item:
Maestro Setup
• This setting is only available when the iDataLink Maestro®
module (sold separately) is connected.
• Depending on the iDataLink module, this setting item may
not be displayed or the setting contents may differ.
Setting the Vehicle Information
The Vehicle Information setting can be changed for the
connected iDataLink module.
Setting item:
Vehicle Information
• This setting is only available when the iDataLink Maestro®
module (sold separately) is connected.
• Depending on the iDataLink module, this setting item may
not be displayed or the setting contents may differ.
Setting the Gauges
The Gauges setting can be changed for the connected
iDataLink module.
Setting item:
Gauges
• This setting is only available when the iDataLink Maestro®
module (sold separately) is connected.
• Depending on the iDataLink module, this setting item may
not be displayed or the setting contents may differ.
Setting the Parking Sensor
The Parking sensor setting can be changed for the
connected iDataLink module.
Setting item:
Park Sensor
• This setting is only available when the iDataLink Maestro®
module (sold separately) is connected.
• Depending on the iDataLink module, this setting item may
not be displayed or the setting contents may differ.
Setting the Climate
The Climate setting can be changed for the connected
iDataLink module.
Setting item:
Climate
• This setting is only available when the iDataLink Maestro®
module (sold separately) is connected.
• Depending on the iDataLink module, this setting item may
not be displayed or the setting contents may differ.