EasyManua.ls Logo

Alpine IVE-W535ABT - Settings When Switching Users

Alpine IVE-W535ABT
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21-EN
01GB05IVE-W535ABT.fm
ALPINE IVE-W535ABT/IVE-W535EBT 68-21057Z56-A (EN)
EN
8
Select the material of the car seats.
The settings confirmation screen is displayed.
If the car seats are made of both leather and fabric, select [Half
leather].
9
Check the settings and touch [OK].
If Preset3 was already saved for Time Correction/X-OVER/
Parametric EQ, the data will be overwritten.
The Easy sound settings are reflected in the following Audio Setup
items.
Setting the MX (Media Xpander)
- Adjusting the Parametric Equalizer Curve (Parametric EQ)
Adjusting the Time Correction (Time Correction)
Adjusting the Crossover Settings (X-OVER) (only when
Subwoofer is set to [On])
The Equalizer Presets (Bass Max EQ) settings are disabled.
Downloaded Sound Settings
Using a USB memory device, the sound settings downloaded from the
ALPINE website can be used to configure Time Correction, X-OVER
and Parametric EQ settings.
Setting item: Downloaded Sound Settings
The file name of download data shall be “A_U*****.MP3.
Save the setting data in the root folder.
For details about procedures of download, see ALPINE’s web site.
1
Touch [Downloaded Sound Settings].
Setting data files are displayed in a list with a maximum of 5
items.
2
Touch the desired file.
3
Touch [OK].
The downloaded setting values are set as the Time
Correction/X-OVER/Parametric EQ settings, and at the
same time saved as Preset3, respectively.
When no USB memory is connected, the “iPersonalize Setting”
function is not available.
If Preset3 was already saved for Time Correction/X-OVER/
Parametric EQ, the data will be overwritten.
Settings When Switching Users
The functions/settings that are affected when switching users are as
shown below.
*
1
Except i-Personalize Setup
*
2
The display pattern can be set when a camera equipped with a switch
function on the Camera screen is connected.
Items whose settings are affected when switching
registered users, are indicated by
” in this manual.
Example:
Extender (fixed)
Identifier (alphabet or number
5 letters maximum)
Header (fixed)
Item Ref. page
My Favorites User Registration 18
Setting My Favorites*
1
19
Displaying the Camera Image*
2
20
General Setup Setting Top banner and Bottom banner
Display
36
Switching the Display Colour 36
Sound Setup Turning Subwoofer ON/OFF 39
Adjusting the Subwoofer Level 39
Source setup Source Layout Setting 46
Hands-Free
Phone Control
Assigning as a Short Cut Dialling
Number
59
Redial Function 58
Phone Book Function 58
Camera
Operation
Switching the Image Pattern for the
Rear Camera*
2
66
Switching the Image Pattern for the
Front Camera*
2
69
Guide Display ON/OFF Setting 66, 69
Adjusting the Caution Display Location 66, 69
01GB00IVE-W535ABT.book Page 21 Wednesday, July 25, 2012 5:22 PM

Table of Contents

Other manuals for Alpine IVE-W535ABT

Related product manuals