Alpine IVE-W535BT - Installation and Connections

ALPINE IVE-W535BT QRG 68-21057Z55-A (EN)
5-EN
EN
DE
FR
ES
IT
SE
NL
RU
PL
GR
Owner’s manual User Registration
User Registration
You can register up to two users. Configure the User 1 and User 2 settings for each user.
1 Press the (My Favorites) button.
The My Favorites screen is displayed.
2 Touch [Start].
The user name input screen for the first user is
displayed.
Touching [Skip] registers the user name as
“USER 1” or “USER 2” and no BLUETOOTH device
is registered. In this case, the users will not be
switched automatically.
Touching [Cancel] or pressing the
(My
Favorites) button returns to the original screen
without registering a user.
3 Input the user name from the keypad and
touch [OK].
The BLUETOOTH Device Setup screen is displayed.
Touch [
] to edit the name.
4 Touch [Link], then touch [OK].
The BLUETOOTH Device List is displayed.
Touching [Do not Link] exits user registration
without registering a BLUETOOTH device.
•
•
•
•
5 Touch [Search].
The system starts searching for BLUETOOTH
devices.
When the search is completed, the BLUETOOTH
Device List is displayed.
Set the BLUETOOTH setting on the preregistered
BLUETOOTH device side to “ON.”
6 Touch a registered BLUETOOTH device and
touch [OK].
My Favorites screen for USER1 is displayed.
Register User 2
7 Press the (My Favorites) button.
The My Favorites screen is exited and the display
returns to the original screen.
8 Press and hold the (My Favorites) button
for at least 3 seconds.
The My Favorites user guide is displayed. Repeat
steps 2 through 6 to register USER 2.
•
e