iXE-W400E Software Update Instruction Manual
The following process provides information on how to successfully perform a software
update for the iXE-W400E. The new software is 0.1.7.
IMPORTANT: Please follow each step in the correct order to ensure that the iXE-W400E gets
updated correctly.
Before commencing the update procedure you should prepare all the necessary equipment. To
perform the update you will need the following items:
• Access to a computer
• Blank USB ash drive with a minimum of 4GB capacity
Step One: Downloading File From Alpine Website
1.1 Download the update le from the Alpine Australia website.
1.2 Extract all zip les onto your computer.
1.3 You will need a blank USB stick to complete this Software Update. The USB stick can
not contain any other les and should be formatted in FAT32 format, as per image below.
1.4 Open the update le (0.1.7) from downloads on your computer.
To Next Page
