33 34
Preperation: Front Door
Use a Rivnut tool to mount the provided M6 Rivnuts into the 9mm holes in the door
sheet metal.
45
Turn over the Rear door cards. Remove the bottom plastic push clips from the card.
Place them aside for use later.
46
Preperation: Rear Door
Take the provided template and place it on the rear of the door card. Using the push
clips holes to carefully line up the template. ake care during this step as it is critical for
proper installation.
47
With the template condently in place. Use some masking tape to secure it in place.
You will need to reuse this template so be sparring when taping it down.
48
To Next Page
Loading...
