Power Output (20Hz to 20kHz, 4ohm x 4ch, 1.0% T.H.D. (14.4V)) 50W
(20Hz to 20kHz, 2ohm x 4ch, 1.0% T.H.D. (14.4V)) 75W
(20Hz to 20kHz, 4ohm(BTL) x 2ch, 1.0% T.H.D. (14.4V)) 150W
Input Sensitivity (Ref.Output 50W/4ohm, Speaker Input) Gain VR MAX : 0.4V±4dB
Gain VR MIN : 8.0V±3dB
(Ref.Output 50W/4ohm, RCA Input) Gain VR MAX : 0.2V±4dB
Gain VR MIN : 4.0V±3dB
Pre Out Level (Ref.1kHz, 10kohm Load, Input 0.5Vrms) 0.5±0.1V
Frequency Response (Ref.Output 1W, Ref.Frequency : 1kHz 0dB) 10Hz : -1.0~0dB
50kHz : -1.0~0dB
Pre Out Frequency Response 20Hz : 0±1dB
(Input Signal Level : 0.5Vrms, 10kohm Load) 20kHz : 0±1dB
Channel Separation (1kHz, 4ohm x 4ch, 1W, Input shorted) 55dB
S/N Ratio (1kHz, 4ohm x 4ch, 50W, Input shorted) 90dB
Residual Noise (Input short, 4ohm Load) 3.0mV
Output Offset Voltage (No Signal) 0V±50mV
Remote On Voltage (1W Output) 6.2±1V
Current Drain (No Signal) 1.5A
(50W x 4, 4ohm Load) 23±5A
(Remote Current Drain) 1.1±0.3mA
(Back up Current Drain) 0.1mA
Input Impedance (Reference) RCA Input : 14.66k ohm±10%
Speaker Input : 14.9k ohm±10%
Fuse Requirement 25A(Peak) x 2 (For Battery Line)
Power Source DC14.4V (11 to 16V)
Dimensions (W x H x D) 270 x 60 x 241.8mm
Weight 2.56kg
NOTE : Due to Continuing product improvement, specifications and designs are subject to change without notice.
To Next Page
Loading...
