EasyManua.ls Logo

Alpine PSS-23WRA - Detailed Precautions and Warnings; Vehicle and Installation Safety; Product Handling and Electrical Safety

Alpine PSS-23WRA
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Jeep Wrangler
UNLIMITED JL z 2/11
Types of Precautions
Forbidden
Indicates actions that are
forbidden (must not be performed)
Forbidden
Indicates that disassembly is
forbidden.
Mandatory
Indicates actions that are
mandatory (must be performed)
Marks content that should receive
your full attention.
Warning
Do not disassemble or modify the
product. Doing so could lead to an
accident, re, or electric shock.
Store screws and other small objects
where small children cannot reach them.
If one of these small objects is swallowed,
consult with a doctor immediately.
When replacing fuses, be sure to
use fuses with the specied current
rating. Failing to do so could lead to
an accident or re.
Only connect the product to a 12 VDC
negative ground car. Failing to do so
could lead to an accident or re.
Before you begin wiring, remove the
ground wire from the negative terminal of
the battery. Failing to do so could lead to
electric shock or injury.
Do not cut the insulation on a cord and
take power from another device. Doing so
could lead to re or electric shock.
Do not install the product in a location
where it will obstruct the driver’s forward
view; interfere with the operation of the
steering wheel, gearshift, or the like; or
pose a threat to passengers. Doing so
could lead to an accident or injury.
When making a hole in the vehicle body,
be careful to avoid damaging pipes, the fuel
tank,electrical wiring, and the like. This kind
of damage could lead to an accident or re.
When installing and grounding the
product, do not use any of the bolts or
nuts of the steering wheel, brakes, fuel
tank, or the like. Doing so could make the
brakes stop working or lead to re.
Do not install the product near the
passenger-side airbag. Doing so could
interfere with the operation of the airbag
and lead to an accident or injury.
Bundle cords so that they don’t interfere
with driving. Wrapping cords around the
steering wheel, gearshift, brake pedal,
or the like, could lead to an accident or
damage equipment.
Caution
Connect the product properly according
to the instructions. Failing to do so could
lead to re or an accident.
Do not sandwich cords between the
seat railing or allow them to touch
protrusions. Resulting breaks or shorts
could lead to electric shock or re.
Do not block vents or heat sinks. Doing so
could lead to re or damage equipment.
Use the accessories according to the
instructions, and attach them securely.
Failing to do so could lead to an accident
or damage equipment.
Do not install the product where it may be
exposed to water or in a place with high
levels of humidity or dust. Doing so could
lead to re or damage equipment.
The installation and wiring of this
product requires specialized skills and
experience. Have the product installed by
an Alpine authorized dealer.
Forbidden
Forbidden
Mandatory
Mandatory
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden

Related product manuals