Jeep Wrangler
UNLIMITED JL z 7/11
Installation (continued)
7 Connect the main harness to the amplifier assembly
and align it to the seat mounting holes.
Front of Vehicle
9 Connect the T-harness and main harness to the
radio. Refer to page 8, 9 or 10 for the corresponding
system wiring diagram.
11 Return all removed components to their
corresponding location and connect the
Negative (-) battery terminal.
8 Route the main harness along the side of the center
console to the radio location.
10 Connect the replacement dash speakers and
mount them using the factory screws.
To Next Page
Loading...
