13
Remote Commander
Operating Instructions
Connect PWD-X5 wired controller to PWD-X5
machine and power on properly.
Note: The controller will not work if PC/BT is
connected
Adjusting Volume and Subwoofer
Level
1. Turn the knob to adjust the master volume,
press the knob once to change subwoofer
level.
2. Press and hold 2-3 seconds to mute the
output.
Switching Sources
1. Press the knob to change input source active.
2. Turn to select and press once to select.
Selecting Preset
1. Long press the knob (≥5 seconds) to select
preset.
2. Select the preset and press once to load.
Wired Controller
To Next Page
Loading...
