7
Reset / Restore Equalizer
1. Click [Reset EQ] to reset all EQ
parameters to the default values
2. Click [Restore EQ] to toggle between
EQ on/off
Output Level, Phase and Mute
1. Set levels by pressing the channel volume,
Then +/- to adjust the output level
2. Change the phase from 0° to 180°
3. Press the speaker to MUTE the channel
Set Crossover (XOver)
1. Select Xover from the settings menu.
2. Use the slider to change the HPF/LPF
crossover frequency.
3. Select a slope (ch1-4 6/12db/oct,
ch 5 6/12/18/24 db/oct)
Channel Linking
1. Select the link button to link left and right
channels
2. Select which channel to copy to/from
Mobile Phone App
To Next Page
Loading...
