Alpine PXE-0850X - Page 19

Sound Processor
PXE-0850X 20201201v1
z 19/28
Mobile Phone App Instructions- EQ
1 Output Channel The 12 output channels can be selected by sliding left or right.
2 EQ Curve Displays the current curve of the EQ adjustments.
3
Frequency, Q
Value, Gain
Adjust the Frequency, Q-Value, and Level. Note: Q and Frequency can only be adjusted when using
the Parametric EQ. Only Level can be adjusted in Graphic EQ mode.
4 Gain Slide up or down to increase or decrease the gain between -12dB and +12dB.
5 Band On/Off Press to bypass the EQ band. Press again to put the setting back to where it was.
6 P. EQ/G. EQ Mode
Selects either the Parametric EQ mode or the Graphic EQ mode. Switching the mode will result in a
loss of all settings.
7 Reset EQ Reset the EQ settings.
8
Restore/Bypass
EQ
Press to temporarily bypass the EQ settings. Press again to restore the settings.
1
4
5
2
3
6
7
8