Alpine SWE-1000 - Speaker Level Input Connections

9-EN
ALPINE SWE-1000 68-04123Z97-A (EN)
a CONNECTIONS FOR SPEAKER LEVEL INPUT
White
Red
RCA Cable
White
Red
Head Unit
Speaker to RCA
Converter Cable
Remote turn-on
lead
Black
Yellow
Yellow
Battery extension lead
FUSE
(10A)
Connect the ground lead securely
and safely to a metal spot of the chassis.
• Be sure to use the supplied extension
cable for connection to the positive (+)
post of the battery.
• DO NOT connect this lead to the head
unit.
• DO NOT modify this cable.
It may cause malfunction and damage
to the product.
Blue/White
Ground lead
White
Red
Speaker to RCA
Converter Cable
Green
Violet
Green/Black
Violet/Black
Left Speaker
Right Speaker
Connect to either the front or rear speaker
output leads.
Note:
Subwoofer output will be affected by the
fader settings of the head unit.
If your head unit does not have a remote turn-
on lead, connect the ACC power lead to the
unit. (Power is supplied to this lead when the
ignition key is set to the ACC position.)
Right speaker Output
Left speaker Output
Right speaker Output
Left speaker Output
12V
Type of Lead
Remote turn-on
lead
Ground lead
Battery extension
lead
Additional Information
Connect to the remote turn-on lead of the head unit.
• If your head unit does not have a remote turn-on lead, connect the
ACC power lead to the unit. (Power is supplied to this lead when
the ignition key is set to the ACC position.)
Connect securely to a bare metal spot of the chassis.
Connect directly to the positive (+) post of the battery.