4-EN
ALPINE SWE-1000 68-04123Z97-A (EN)
Be sure to use the supplied power extension cable (with 10 A fuse), and connect the cable directly
to the positive (+) post of the battery.
Be sure to use the supplied power extension cable, and connect the cable directly to the positive (+) post of
the battery. If a power cable is connected by dividing an existing power cable of the vehicle, low voltage may
result in poor product function; this power cable may result in heat, smoke or fire.
Securely connect a ground lead from the product to a bare metal part of a vehicle chassis.
Securely fasten using the screw. If connection is not securely made, the product may not function normally. For
a good chassis ground connection, remove any paint on the metal with a file.
DO NOT EXCEED THE INPUT LEVEL SPECIFIED FOR THIS PRODUCT.
If sound distortion or popping noise is output from the speaker, the input level to the speaker is excessively
increased. If the input level to the speaker remains excessive, its performance may result in deterioration or
cause damage to the speaker.
DAMAGE CAUSED BY EXCESSIVE INPUT LEVEL IS NOT COVERED BY THE WARRANTY.
If gain is adjusted to eliminate distortion at the output, maximum available, volume level may be insufficient. In
this case, place the product closer to the listener. Theoretically, halving the distance will result in 4 times the
volume.
DO NOT USE A MOBILE PHONE NEAR THE PRODUCT.
Use of a mobile phone may cause malfunction and noise.
To Next Page
Loading...
