EasyManua.ls Logo

Alpine UTE-42EBT - Specifications; CHASSIS SIZE; NOSEPIECE SIZE; FM TUNER SECTION

Alpine UTE-42EBT
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34-EN
Specifications
FM TUNER SECTION
AM TUNER SECTION
CD PLAYER SECTION (CDE-143EBT/CDE-143EBTTH only)
PICKUP
USB SECTION
BLUETOOTH SECTION
GENERAL
CHASSIS SIZE
NOSEPIECE SIZE
Note
Due to continuous product improvement, specifications and design are
subject to change without notice.
Tuning Range 87.5~108.0 MHz
Mono Usable Sensitivity 9.0 dBf (0.8 µV/75 ohms)
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio 65 dB
Stereo Separation 35 dB
Capture Ratio 2.0 dB
Tuning Range 531~1,602 kHz
Sensitivity (IEC Standard) 22.5 V/27 dB
Frequency Response 5~20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion 0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)
Wave length 795 nm
Laser power CLASS I
USB requirements USB 1.1/2.0
Max. Power Consumption 1,000 mA
USB Class Mass Storage
File System FAT 12/16/32
MP3 Decoding MPEG AUDIO Layer-3
WMA Decoding Windows Media
Audio
AAC Decoding AAC-LC format “.m4a” file
BLUETOOTH Specification BLUETOOTH V 3.0
Output Power +4 dBm Max. (Power class 2)
Profile HFP (Hands-Free Profile)
HSP (Head Set Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
Power Requirement 14.4 V DC
(11~16 V allowable)
Maximum Power Output 50W × 4
Maximum Pre-Output Voltage 2 V/10 k ohms
Bass ±14 dB at 100 Hz
Treble ±14 dB at 10 kHz
Loudness 10 dB at 100 Hz
Weight 1.5 kg (3 lbs. 4 oz)
Width 178 mm (7")
Height 50 mm (2")
Depth 160.5 mm (6–3/8")
Width 170 mm (6–3/4")
Height 45.5 mm (1–13/16")
Depth 22.5 mm (1")
00ALPINE.book Page 34 Friday, November 16, 2012 4:10 PM

Table of Contents

Related product manuals