EasyManua.ls Logo

Alpine UTE-80B - Specifications

Alpine UTE-80B
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17-EN
Specifications
FM TUNER SECTION
AM TUNER SECTION
USB SECTION
GENERAL
CHASSIS SIZE
NOSEPIECE SIZE
Note
Due to continuous product improvement, specifications and design are
subject to change without notice.
Tuning Range 87.5 ~ 108.0 MHz
Mono Usable Sensitivity 9.3 dBf (0.8 μV/75 ohms)
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio 65 dB
Stereo Separation 35 dB
Capture Ratio 2.0 dB
Tuning Range 531 ~ 1,602 kHz
Sensitivity (IEC Standard) 22.5 μV/27 dB
USB requirements USB 1.1/2.0
Max. Power Consumption 1,000 mA
USB Class Mass Storage
File System FAT 12/16/32
MP3 Decoding MPEG AUDIO Layer-3
Power Requirement 14.4 V DC
(11 ~ 16 V allowable)
Maximum Power Output 50 W × 4
Bass ±14 dB at 100 Hz
Mid ±14 dB at 1 kHz
Treble ±14 dB at 10 kHz
Weight 0.9 kg (1lbs. 15 oz)
Width 178 mm (7")
Height 50 mm (2")
Depth 160.5 mm (6–5/16")
Width 170 mm (6–3/4")
Height 46 mm (1–13/16")
Depth 25 mm (1")
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson. Supply of this product only conveys
a licence for private, non-commercial use and does not convey a
licence nor imply any right to use this product in any commercial
(i.e. revenue-generation) real time broadcasting (terrestrial,
satellite, cable and/or any other media), broadcasting/streaming
via internet, intranets and/or other networks or in other electronic
content distribution systems, such as pay-audio or
audio-on-demand applications. An independent licence for such
use is required. For details, please visit
http://www.mp3licensing.com

Table of Contents

Other manuals for Alpine UTE-80B

Related product manuals