(optional) If necessary, tap then and enter
the coordinate in UTM format.
4. The route is calculated and the map appears showing the entire route, where you can
check route information and route alternatives. Tap to modify the
route parameters, or tap to start your journey.
3.1.7 Selecting a location on the map
To select a map location, perform the following steps:
1. Locate your destination on the map. Move and scale the map as necessary.
2. Tap the location that you want to select as your destination. The cursor ( )
appears there.
3. (optional) If needed, tap to list the Places near the selected point
or to save this location.
To Next Page
Loading...
