S-M10 HELMET
MANUAL
INSTRUCTIONS
FOR USE MANUAL
CRITICAL SAFETY USER INFORMATION
This helmet has been constructed, tested and approved as meeting
the European ECE Standard and this helmet is compliant with the ap-
plicable U.S. Department of Transportation’s DOT standard. This hel-
met must only be used in countries where the ECE Standard or DOT
standards are applicable. If you use the helmet in a country which
does not follow the ECE Standard or DOT standard and are injured, you
may not make a claim in the courts of that country, or the courts of any
other country that does not follow the ECE or DOT Standards.
This helmet is not sold or intented for use in Japan as it does not con-
form to Japanese regulations or requirements.
To Next Page
Need help?
General
