MISSILE SERIES
BICYCLE HELMET
INFORMATION
FOR USERS
NOT TO BE REMOVED EXCEPT BY CONSUMER
This helmet has been constructed, tested and approved as meeting the
European Standard EN 1078:2012+A1:2012. This product is tested and certified
also under the corresponding UK legislation (i.e. Regulation (EU) 2016/425 as
brought into UK law and amended and the Personal Protective Equipment
(Enforcement) Regulations 2018). This helmet also complies with U.S. CPSC
Safety Standard (CPSC 16 CFR 1203) for Bicycle Helmets for Persons Age 5 and
Older. This helmet also complies with U.S. ASTM 1952- 15 and the Australian/
New Zealand Standard AS/NZS 2063:2008. This helmet must only be used in
countries where the EN, CPSC, ASTM Standards or AS/NZS standards are
applicable. If you use the helmet in a country which does not follow the EN,
CPSC, ASTM or AS/NZS Standards and are injured, you may not make a claim
in the courts of that country, or the courts of any other country that does not
follow the EN, CPSC, ASTM or AS/NZS Standards. This helmet is not sold or
intended for use in Japan as it does not conform to Japanese regulations or
requirements.
To Next Page
Need help?
General
