Alptop Security AT-200DW - User Manual

Wi-Fi IP CAMERA
OPERATION GUIDE
www.alptopsecurity.com
support@alptopsecurity.com
Apply for Model: AT-100BW/200BW/500BW,AT-200DW/PW/TW,AT-500PW/20
Note: Due to the continuous updating of the product and software, there may be a discrepancy between the
operating guide and the APP interface. All the instructions are subject to the actual operation interface.

Summary

Installation Guide

Accessing via Camhipro APP

LAN Mode Configuration

Connects the camera to the router via a network cable for Wi-Fi setup.

AP Mode Configuration for iOS Devices

Configures the camera using its own Wi-Fi hotspot for iOS devices.

AP Mode Configuration for Android Devices

Configures the camera using its own Wi-Fi hotspot for Android devices.

APP Function Introduction

Camera Alarm Setting

Guides on enabling and configuring motion detection and alarm notifications.

Record to SD Card Setting

Covers settings for recording video files to the SD card.

Alarm Recording to SD Card Setup

How to set up the camera for alarm-triggered recording on the SD card.

Schedule Recording to SD Setup

How to set up continuous recording based on a schedule on the SD card.

Computer Browsing Access

Search IP Camera on Network

View Video via Browser

Video Management Software (HIP2 P Client)

Software Installation

Add Camera to HIP2 P Client

Steps to add cameras to the HIP2P Client software.

Frequently Asked Questions

Remote Viewing Performance Issues

Addresses issues with remote viewing performance and suggests solutions.

Connectivity and Access Problems

Troubleshooting password errors, Wi-Fi connection, and device offline status.

SD Card Usage and Troubleshooting

Network and IP Address Issues

Alptop Security AT-200DW Specifications

General

Brand	Alptop Security
Model	AT-200DW
Category	IP Camera
Language	English