Alptop Security AT-200PW - User Manual

Wi-Fi IP CAMERA
OPERATION GUIDE
www.alptopsecurity.com
support@alptopsecurity.com
Apply for Model: AT-100BW/200BW/500BW,AT-200DW/PW/TW,AT-500PW/20
Note: Due to the continuous updating of the product and software, there may be a discrepancy between the
operating guide and the APP interface. All the instructions are subject to the actual operation interface.

Summary

Installation

Accessing via Camhipro APP

LAN Mode Configuration

Configures WiFi connection using the CamHipro APP via a network cable.

AP Mode Configuration for iOS

Configures camera via AP mode when no router port is available for iOS devices.

AP Mode Configuration for Android

Configures camera via AP mode when no router port is available for Android devices.

SD Card Setting

Manages SD card storage, capacity, and formatting within the camera settings.

Time Setting

Camera Alarm Setting

Enables motion detection, alarm push notifications, and sensitivity adjustments.

Record to SD Card

Configures alarm and schedule recording to SD card, including playback and download.

Share Camera with Users

Computer Browsing Access

Search IP Camera

Locates IP cameras on the network using a search tool.

View Video by Browser

Parameter Settings - Media

Parameter Settings - Network

Parameter Settings - Alarm

Video Management Software (HIP2 P Client)

Software Installation

Add Camera to Software

Procedure for adding IP cameras to the HIP2P Client software.

Frequently Asked Questions

Connectivity and Network Problems

Alptop Security AT-200PW Specifications

General

Connectivity	Wi-Fi, Ethernet
Two-way Audio	Yes
Motion Detection	Yes
Lens	3.6mm
Weather Resistance	IP65
Power Supply	DC 5V/1A
Audio	Built-in microphone and speaker
Resolution	1920x1080 (1080p)
Night Vision	Yes
Storage	MicroSD card, Cloud
Viewing Angle	90 degrees
Operating Temperature	-10°C to 50°C