Assembly of thAssembly of th
© ALSTOM 2010. All rights reserved. Informat© ALSTOM 2010. All rights reserved. Informat
ion contained in ion contained in
this document is indicative only. No this document is indicative only. No
given or should given or should
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It isrelied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liabiliprovided without liabili
is subject to is subject to
change without notice. Reproduction, use or disclosure to change without notice. Reproduction, use or disclosure to
third parties, without express writtthird parties, without express writt
en authority, isen authority, is
strictly prohibited.strictly prohibited.
Fastening onto theFastening onto the
ground wtth spacersground wtth spacers
= IPB axis to the ground= IPB axis to the ground
Fixed support to their required torque (Fixed support to their required torque (
) on the ground with the) on the ground with the
(Not supplied by ALSTOM Grid See VS...GAD01D).(Not supplied by ALSTOM Grid See VS...GAD01D).
= Distance between phases := Distance between phases :
: beams fitte: beams fitte
d with 2 feets and with 2 feets an
: beams fitted with 3 feets and 3 supports: beams fitted with 3 feets and 3 supports
Circuit-breakerCircuit-breaker
General arrangementGeneral arrangement
CORRECT ADJUSTMENT CONDI-CORRECT ADJUSTMENT CONDI-
TIONS THE CORRECT FUNCTION-TIONS THE CORRECT FUNCTION-
ING OF THE EQUIPMENT.ING OF THE EQUIPMENT.
Busbar central axisBusbar central axis
(NOT SUPPLIED BY(NOT SUPPLIED BY
ALSTOM Grid)ALSTOM Grid)
Continued on next page.Continued on next page.
To Next Page
Loading...
