M2x2/EN M/F User Manual
Page 12
iSTAT M2x2
TABLE 7-4 : USER FEATURES
M212 M232
Set up Wizard
Wrong connection warning
3 Custom screens
Demonstration screens
6.7 Applications
The M2x2 family can be used in a wide range of different applications depending on the
model, the applications are summarised in TABLE 7-5 below.
TABLE 7-5 : APPLICATION
M212 M232
Power measurements
Energy Metering
Programmable alarms
PC software
Power Measurements: All the M2x2 family provide a wide range of instantaneous
measurement values; Voltage, current, Power, phase angle, power factor and frequency.
These are available locally on all the M2x2 family and remotely on the M232.
Energy and sub Metering: With 4 quadrant energy measurement, the M2x2 can be used in
sub metering applications where information is passed to an energy management system to
monitor the performance of the ac power system. The M2x2 can use a combination of
pulsed energy contacts, tariff inputs and communications to integrate with and provide this
data to the control system.
To Next Page
Loading...