Alstom iSTAT M232 User Manual

M2x2
(M212, M232)
Manual
iSTAT M2x2
Standard Measurement Centre
Publication Reference: M2x2/EN/M/F
M2x2 /EN/M/F © 2014. ALSTOM, the ALSTOM logo and any alternative version thereof are trademarks and service marks of ALSTOM. The other names mentioned,
registered or not, are the property of their respective companies. The technical and other data contained in this document is provided for information only. Neither
ALSTOM, its officers or employees accept responsibility for, or should be taken as making any representation or warranty (whether express or implied), as to the
accuracy or completeness of such data or the achievement of any projected performance criteria where these are indicated. ALSTOM reserves the right to revise or
change this data at any time without further notice.
GRID

Alstom iSTAT M232 Specifications

General

Category	Measuring Instruments
Protection Rating	IP65
Housing Material	Stainless Steel
Measurement Type	Pressure
Output	4-20 mA, HART

Summary

Safety Section

Health and Safety

Information to ensure products are properly installed and handled in order to maintain them in a safe condition.

Explanation of Symbols and Labels

Installation, Commissioning, and Servicing

Equipment Connections

Guidelines for safe installation, commissioning, and servicing of equipment and awareness of hazardous voltages.

Equipment Operating Conditions

Current Transformer Circuits

Insulation and Dielectric Strength Testing

Technical Specifications

System Modes

Connection Mode

Describes the menu-configurable connection modes for the M2x2, including single and three-phase connections.

Instrumentation

Measurements

Explains the true RMS measurement technique used by the M2x2 for accurate readings with harmonics.

Hardware

Connections

Details on how voltage and current inputs of the M2x2 are connected to the network.

Communications

Information on available communication ports (RS232, RS485, USB) for the M232 model.

Hardware Functions

Installation Wizard

Guides the user through essential installation steps like language, connection mode, and device address.

Settings

Communications

Communications Ports