Alstom iSTAT M232 - Hardware Functions; Installation Wizard

M2x2/EN M/F User Manual
iSTAT M2x2 Page 31
10.4
Resets Navigation
Figure 11-6 illustrates the resets menu structure. The user can browse through the available
menus using the direction keys, by pressing the DOWNor UP keys and then pressing the
OK key to make a selection. The LEFT key is pressed to return to the Main Menu.
Resets
Figure 11-6
Menu name
Energy Counters
MD Values
Last Period MD
Reset alarm output
Resets display
<- Main Menu
Back to main menu
table 11-3 illustrates the Resets Menu information structure. The user can browse through all
the available menus using the direction keys.
. When the settings section required is
highlighted press OK to access the individual settings.
Pressing the LEFT key returns to
the Resets Menu.
 

Energy
counters
MD values Last period MD
Reset Alarm
output
All energy
counters
No/Yes No/Yes No/Yes
Energy counter
E1
Energy counter
E2
Energy counter
E3

Energy counter
E4
TABLE 11-3 : RESETS MENU INFORMATION STRUCTURE
10.5 Info Navigation
Figure 11-7 illustrates the Product Identify display; this is also the default display during
powerup. This will not refresh back to the main menu so the user has to press the  LEFT
key to get back to the Main Menu.
Alstom Grid
Figure 11-7
Product Identify
M232
Multimeter
Initial power up display and Info
display
www.alstom.com/grid
Figure 11-8 illustrates the Product Information display. This is viewed by pressing either
pressing the
DOWN or  UP keys;. Pressing the  LEFT key to takes the user back to
the Main Menu.