Alstom iSTAT M232 - Communications; Communications Ports; QDSP Setting and Monitoring Software; Modbus

M2x2/EN M/F User Manual
iSTAT M2x2 Page 45
13. COMMUNICATIONS
13.1 Communications ports
The M232 is fitted with a primary communications (COM1) port which can be RS232, RS485
or USB.
The communication parameters of the M232 can be obtained by using the keypad and
display or by using the ‘Scan the network’ feature in the QDSP setting software.
13.2 QDSP Setting and Monitoring Software
See the se
parate QDSP Manual for details of how to Install and use the QDSP Software.
13.3 MODBUS
For detail
s, see Appendix A