User Manual M2x2/EN M/F
iSTAT M2x2
Page 25
10. USER INTERFACE MENU STRUCTURE
10.1 Menu introduction
The settings, measurements and functions of the M2x2 can be accessed from either the
front panel or the remote communications link (M232 only). The menu structure of the M2x2
is navigated using the five keys on the front panel as shown in figure 11-1 below:
FIGURE 11-1 : M232 FRONT VIEW
Throughout this section the following symbols are used in the diagrams to relate to pressing
the corresponding key on the front panel.
Key Left Right Down Up Enter
Symbol
OK
Throughout this section the following symbols are used in the diagrams to relate to
information displayed on the LCD
Key
Password
locked
Wrong
connection
warning
Navigation
keys
Auxiliary
supply too
low
Symbol
To Next Page
Loading...