Alstom MiCOM P125 - Menu Courier COMMUNICATION; Menu IEC 60870-5-103 COMMUNICATION; Menu DNP3.0 COMMUNICATION

P12y/EN FT/D22 Technical Guide
User Guide
Page 36/108 MiCOM P125/P126/P127
4.4.2 Menu Courier COMMUNICATION
This communication protocol is not yet available.
COMMUNICATION
Heading COMMUNICATION menu. To gain access to
submenu, press 2. To modify setting press 5 and 2
8 to scroll available selections. Press 5 to confirm
choice.
Communication?
Yes
Use Courier communication via the RS485 port on the
rear terminals of the relay. To activate the parameter
communication, press 5 and use 8 to select Yes.
Press 5 to enable choice.
Relay Address
1
Displays the network address of the MiCOM relay in
the Courier network.
Select an address from 1 to 255.
4.4.3 Menu IEC 60870-5-103 COMMUNICATION
COMMUNICATION
Heading COMMUNICATION menu. To gain access to
submenu, press 2. To modify setting press 5 and 2
8 to scroll available selections. Press 5 to confirm
choice.
Communication?
Yes
Use VDEW communication via the RS485 port on the
rear terminals of the relay. To activate the parameter
communication, press 5 and use 8 to select Yes.
Press 5 to enable choice.
Baud Rate
9600 bd
Displays the baud rate of VDEW transmission.
Select from: 300, 600, 1200, 2400, 4800, 9600,
19200 or 38400 bd.
Relay Address
1
Displays of the network address of the MiCOM relay in
the VDEW network.
Select an address from 1 to 255.
4.4.4 Menu DNP3.0 COMMUNICATION
To be defined