Alstom MiCOM P50 Agile P15D - Page 68

5 Configuration
P50 Agile P15D
5-32
P15D/EN TM/B
RP1 Address
001
The window displays the first setting of the Communication Menu.
Press the Left arrow key () the relay show as follows
SET For Save
RESET For Cancel
Press the SET / Left arrow key () to SAVE the changes.
Press the RESET key to CANCEL the changes..
OK
When the SET / Left arrow key () is pressed the relay will SAVE the
changes and this window will flash for moment. The control will return to
the main menu.
COMMUNICATION
Note:
* The User can scroll the previous settings by using the Plus / Up arrow key (+ /  ).
** After Editing any sub menus of the COMMUNICATION setting, If the SET/ Left (  ) arrow key is pressed,
the Relay ask SET to SAVE the changes or RESET to CANCEL the changes.
2.3.9.2 View settings
COMMUNICATION
Press the Minus / Right arrow key (- /) to view the communication
settings.
RP1 Address
001
This window shows the RP1 Address setting done previously.
Press the Plus / Up arrow key (+ /) to move to the next option. ***
RP1 Baudrate
57600
This window shows the RP Baudrate setting done previously.
Press the Plus / Up arrow key (+ /) to move to the next option. ***