SYSTEM CONFIG
Password protected window for “SYSTEM CONFIGURATION” settings.
OVERCURRENT
Password protected window for “OVERCURRENT” Protection settings.
EARTH FAULT
Password protected window for “EARTH FAULT” Protection settings.
THERMAL OVER LOAD
Password protected window for “THERMAL OVERLOAD” Protection
settings.
COLD LOAD PICKUP
Password protected window for “COLD LOAD PICKUP” Protection
settings.
UNDERCURR PROT
Password protected window for “UNDERCURRENT” Protection
settings.
2.3.11 GROUP 1 –SYSTEM CONFIGURATION SUB MENU
2.3.11.1 Edit settings (if 2nd Harmonic is disabled)
System Config
By using the Plus / Up arrow key (+ /) or Minus / Right arrow key (-
/) select the System Configuration setting menu in Group 1.
Press the Left arrow key () to move to the next option.
2nd Harmonic
Disabled
Press the Edit Key, the text will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired 2nd Harmonic can set i.e. Enable / Disable
After selecting the desired 2
nd
Harmonic (Disabled) press the Edit Key,
the text will stop blinking. #
Press the Left arrow key () to move to the next option.
To Next Page
Loading...
