SET For Save
RESET For Cancel
Press the SET / Left arrow key () to SAVE the changes.
Press the RESET key to CANCEL the changes.
OK
When the SET / Left arrow key () is pressed the relay will SAVE the
changes and this window will flash for moment. The control will return to
the main menu.
GROUP 1
2.3.11.2 Edit settings (If 2nd Harmonic is enabled)
System Config
By using the Plus / Up arrow key (+ /) or Minus / Right arrow key (-
/) select the System Configuration setting menu in Group 1.
Press the Left arrow key () to move to the next option.
2nd Harmonic
Disabled
Press the Edit Key, the text will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired 2nd Harmonic can set i.e. Enable / Disable
After selecting the desired 2
nd
Harmonic (Enable) press the Edit Key, the
text will stop blinking. #
Press the Left arrow key () to move to the next option.
2nd Harm Thresh
020
Press the Edit Key, the number will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired 2nd Harmonic Threshold can be set. The setting
range is from 005 to 070 in steps of 1.
After editing the desired 2
nd
Harmonic Threshold press the Edit Key, the
number will stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option. *
I>Lift 2H
10.00 A
Press the Edit Key, the number will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired I>Lift 2H can be set. The setting range is from 4.00 to
32.00 *In in steps of 1.
After editing the desired I> Lift 2H press the Edit Key, the number will
stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option. *
2nd Harm Thresh
020
The window displays the first setting of the System Configuration menu.
Press the Left arrow key () to move to the next option.
To Next Page
Loading...
