OK
When the SET / Left arrow key () is pressed the relay will SAVE the
changes and this window will flash for moment. The control will return to
the main menu.
GROUP 1
Note:
#. If the function is set as enabled then the relay will allow editing the settings of respective sub menus. If the
function is set as disabled then the relay will not allow editing the settings of sub menus and will bypass the
protection function.
* The User can scroll the previous settings by using the Plus / Up arrow key (+ /
).
** After Editing any sub menus of the Cold Load Pickup setting, If the SET/ Left (
) arrow key is pressed, the
Relay ask SET to SAVE the changes or RESET to CANCEL the changes.
Note :
The settings of I>2 Function, I>3 Function, IN>1 Function, IN>2 Function and IN>3 Function to be set in similar
manner as that of I>1 Function.
2.3.16 GROUP 1 - Under Current Protection SUB MENU
2.3.16.1 Edit settings (if I< Status is set as Disabled)
UnderCurr Prot
By using the Plus / Up arrow key (+ /) or Minus / Right arrow key (-
/) select the Under Current Protection setting menu in Group 1.
Press the Left arrow key () to move to the next option.
To Next Page
Loading...
