I< Status
Disabled
Press the Edit Key, the text will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired I< Status can be set i.e. Enable / Disable #
After selecting the desired I< Status (Disable) press the Edit Key, the
text will stop blinking.
Press the Left arrow key () to move to the next option.
SET For Save
RESET For Cancel
Press the SET / Left arrow key () to SAVE the changes.
Press the RESET key to CANCEL the changes.
OK
When the SET / Left arrow key () is pressed the relay will SAVE the
changes and this window will flash for moment. The control will return to
the Main Menu
GROUP 1
Note:
#. If the function is set as enable then the relay will allow editing the settings of respective sub menus. If the
function is set as disable then the relay will not allow editing the settings.
* The User can scroll the previous settings by using the increment / Up arrow key (+ /
).
** After Editing any sub menus of the Under Current protection setting, If the SET/ Left (
) arro
w key is
pressed, the Relay ask SET to SAVE the changes or RESET to CANCEL the changes.
2.3.16.2 Edit Settings (if I< Status is set as Enabled)
UnderCurr Prot
By using the Plus / Up arrow key (+ /) or Minus / Right arrow key (-
/) select the Under Current Protection setting menu in Group 1.
Press the Left arrow key () to move to the next option.
I< Status
Enabled
Press the Edit Key, the text will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired I< Status can be set i.e. Enable / Disable #
After selecting the desired I< Status (Enable) press the Edit Key, the text
will stop blinking.
Press the Left arrow key () to move to the next option.
To Next Page
Loading...
