To Next PageTo Next PageWhy does my ALTA Solar panel motor beep 10 times when in use?
If your ALTA Solar panel motor beeps 10 times during use, it indicates that the battery voltage is low or there's an issue with the PV (solar panel). To resolve this, recharge the motor with a charger or check the connection and positioning of the solar panel.
What to do if ALTA Remote Control motor has no response?
If your ALTA Remote Control motor isn't responding, there might be several reasons: * **Radio interference/shielding:** Keep the remote control and motor antenna away from metal objects. * **Distance:** Move the remote control closer to the receiver. * **Power:** Check the power supply to the motor to ensure it is connected and active. * **Wiring:** Verify that the wiring is connected correctly.
Why does my ALTA Bliss Automation motor beep 10 times?
If your ALTA Remote Control motor beeps 10 times during use, it indicates that the battery voltage is low or there is an issue with the PV (solar panel). To resolve this, recharge the motor with the provided charger and/or check the connection and positioning of the solar panel.
What to do if cannot program a single motor (multiple motors respond) on ALTA Remote Control?
When you can't program a single motor and multiple motors respond to ALTA Remote Control, it could be due to a few reasons: 1. Multiple motors are paired to the same channel. In this case, always reserve an individual channel for programming functions. 2. It is a system best practice to provide an extra remote control for multi-motor projects that provides individual control for each motor for programming purposes. 3. Place all other motors into sleep mode (refer to P1 button instructions).
How to recharge depleted battery in ALTA Bliss Automation motor?
If the ALTA Remote Control motor battery is depleted, recharge it using the provided charger and/or check the connection and positioning of the solar panel.
Why is ALTA Remote Control solar panel not charging properly?
If you're experiencing insufficient charging from the solar panel for your ALTA Remote Control, check the connection and orientation of the solar panel.
What to do if ALTA Bliss Automation Remote Control battery is not inserted correctly?
If the battery is not inserted correctly in your ALTA Remote Control, check the battery polarity and ensure it is properly aligned.
General| Brand | ALTA |
|---|---|
| Model | Bliss Automation |
| Category | Remote Control |
| Language | English |
Lists available shade types compatible with the remote control.
Details technical specifications of the BLISS remote control, including voltage and frequency.
Explains the functions of each button on the BLISS remote control.
Provides step-by-step instructions for replacing the remote control battery.
Instructions for selecting and hiding channels on the BLISS remote control.
How to enable or disable advanced settings like limit setting and motor direction.
Shows the physical location of the P1 button on different BLISS remote models.
Details the operational modes triggered by pressing the P1 button for various durations.
Steps to connect or disconnect a remote control to the motor.
Guide on how to reverse the motor's direction of operation.
Instructions for setting the maximum and minimum travel limits for the shade.
Procedure to set the highest position for the shade.
Procedure to set the lowest position for the shade.
Steps to assign a specific position as a favorite for the shade.
Instructions to move the shade to its pre-set favorite position.
Procedure for removing a previously saved favorite position.
Steps to add a new remote using an existing paired remote.
Instructions for pairing a new remote control independently.
Procedure to increase the motor's acceleration speed.
Procedure to adjust the motor's deceleration speed.
Configures the shade for continuous movement after a short press.
Enables jog movement after a short press, with continuous after long.
