20
6.1 Color test
Choose “Color test“ from the "Calibrate" menu.
Open the cover of the color reference and position
the instrument on the standard. The instrument
snaps into the indentation of the standard and can
only be positioned in one direction.
Choose "OK" with the scroll wheel.
When the color test is completed, an affirmation is
shown in the display.
Confirm by pressing the operate button or the wheel
to return to the main menu.
If the reading of the color reference was out of
tolerance, a black and white calibration is
necessary. The instrument leads you directly to the
calibration display.
Calibrate
To Next Page
Loading...
