25
8. Measure
Select the menu item Measure by pressing the
operate button/scroll wheel.
A selection menu appears.
”Continue last series”: To continue the last test
series. If no series is stored, it will be created.
”Absolute”: To measure absolute data.
”Difference”: To measure differences. Select an
existing standard, create a new one or use the
function „Auto Standard“.
”car_01”: To take readings according to a predefined
measurement sequence (organizer).
8.1 Continue last series
”Continue last series” leads you directly to the
measuring sequence of the last series. Press
operate to start the reading.
Measure
To Next Page
Loading...
