Need help?Do you have a question about the Altec Lansing A7-8G VOTT SPEAKER SYSTEM and is the answer not in the manual?
General| Brand | Altec Lansing |
|---|---|
| Model | A7-8G VOTT SPEAKER SYSTEM |
| Category | Speaker System |
| Language | English |
50 watts continuous pink noise, band-limited from 20 Hz to 20 kHz.
Uniform from 40 Hz to 20 kHz.
102.5 dB SPL at 1m with 1 watt input of band-limited pink noise.
60° vertical x 90° horizontal at 6 dB for band-limited pink noise.
8 ohms.
Dual full section, switchable 500/800/1200 Hz crossover, 12 dB/octave slope.
42" H x 30" W x 24" D; 52 1/4" H with horn top mounted.
175 lbs. (79.5 kg).
Gray texture paint.
Place cabinet face down and remove the rear access panel.
Mount the 515-8G LF loudspeaker using four 1/4"-20 machine screws.
Remove network hole cover and install network in rear panel.
Decide on internal or external mounting for the 511B HF Horn.
To Next Page