Altec Lansing ATP3 User Manual

© 2000 Altec Lansing Technologies, Inc.,
Milford, PA 18337
800-ALTEC-88 • www.altecmm.com
One Year Limited Warranty
Altec Lansing Technologies, Inc. warrants
to the end user that all of its computer
speaker systems are free from defects in
material and workmanship in the course
of normal and reasonable use for a term of
one year from the date of purchase.
This warranty is the exclusive and only
warranty in effect relative to Altec
Lansing computer speaker systems and
any other warranties, either expressed
or implied, are invalid. Neither Altec
Lansing Technologies, Inc. nor any
authorized Altec Lansing Technologies,
Inc. reseller is responsible for any
incidental damages incurred in the use of
the speakers. (This limitation of
incidental or consequential damage is not
applicable where prohibited.)
Altec Lansing Technologies, Inc.’s
obligation under this warranty does not
apply to any defect, malfunction or
failure as a result of misuse, abuse,
improper installation, use with faulty or
improper equipment or the use of the
computer speaker systems with any
equipment for which they were not
intended.
The terms of this warranty apply only to
computer speaker systems when such
speakers are returned to the respective
authorized Altec Lansing Technologies,
Inc. reseller where they were purchased.
Under the terms of this warranty the
original consumer purchaser has certain
legal rights and may have other rights
which vary worldwide.
Specifications
Overall
Total Audio Power 30 Watts RMS
Input Sensitivity 300 mV for full
output
Input Impedance >10 kOhms
Frequency Response 45 Hz – 18 kHz
Satellites
Drivers (per satelllites) Two 28 mm
micro drivers
One 3” mid-bass
Audio Power 6 Watts per
satellite
(12 Watts total)
RMS @ 1% THD
S/N Ratio >70 dB
Subwoofer
Driver One 6.5” long
throw
Audio Power 18 Watts
RMS @ 1% THD
Crossover Frequency 150 Hz
Power Requirements
USA/CANADA 120 Volts 60 Hz
AC
Europe/United Kingdom and
various Asian countries 230 Volts
50 Hz AC
ETL/cETL/CE approved
User’s Guide
Computer Speaker System
ATP3

Altec Lansing ATP3 Specifications

General

Speaker Type	2.1 Speaker System
Input	3.5mm stereo mini-jack
Controls	Volume, Bass
Signal-to-Noise Ratio	>70 dB
Input Impedance	10 kOhms
Satellite Power Output	6 Watts RMS per channel
Subwoofer Driver	6.5 inch
Satellite Drivers	2-inch

Summary

System Specifications

Overall Specifications

Details overall system specifications including power, sensitivity, impedance, and frequency response.

Satellite Speaker Specifications

Lists specifications for the satellite speakers, including drivers and audio power per unit.

Subwoofer Specifications

Provides specifications for the subwoofer, including driver size and audio power.

Power Requirements and Certifications

Outlines the power requirements for different regions (USA/Canada, Europe/UK) and certifications.

Limited Warranty Information

Safety and Operation Guidelines

General Safety Precautions

Essential safety guidelines for operating the appliance, covering handling, environment, and usage.

Electrical Safety Warnings

Critical warnings about preventing electric shock and fire hazards by proper usage and avoiding moisture.

Power Cord Connection

Instructions and precautions for connecting the power cord to the AC wall socket for safe operation.

System Description and Controls

Product Description

Provides an overview of the ATP3 system, its components, and its design for multimedia computer use.

Speaker Placement Guidance

Guidance on optimal placement of satellite speakers and the subwoofer for best audio performance and monitor safety.

Control Functions

Details the operation of power, volume, bass, and treble controls for the speaker system.

Power Off Notice

Provides a notice to turn off the ATP3 using its switch before unplugging to avoid popping sounds.

Setup and Connection Instructions

Connecting Speakers to Subwoofer

Step-by-step guide for connecting the left and right satellite speakers to the subwoofer unit.

Connecting Subwoofer to Computer

Instructions for connecting the subwoofer to the computer's audio output using the provided cable.