Need help?Do you have a question about the Altec Lansing MR994A HF HORN and is the answer not in the manual?
General| Brand | Altec Lansing |
|---|---|
| Model | MR994A HF HORN |
| Category | Horn |
| Language | English |
Specifies the horizontal dispersion angle of the horn from 2 kHz to 20 kHz.
Specifies the vertical dispersion angle of the horn from 500 Hz to 20 kHz.
Provides the mean directivity (Q) value for the horn from 2 kHz to 20 kHz.
Details the mean directivity index (DI) in dB for the horn from 2 kHz to 20 kHz.
Indicates the lowest usable frequency for the horn, specified as 500 Hz.
Defines the frequency response range of the horn, from 500 Hz to 20 kHz.
States the pressure sensitivity at 500 Hz, measured with specific conditions.
Measurement conditions for pink noise signal, power calculation, and distance.
Details on calculating performance with one watt input using E²/Zmin.
Handling distortion components above 10 kHz and calculation formula.
On-axis frequency response equalization and horn rotation.
Specifies the horn as a directivity control mid/high frequency type with specific dispersion angles.
Details the horn's acoustic loading capability down to 500 Hz and its pressure sensitivity.
Provides the horn's height, width, depth, and weight.
To Next Page
