Need help?Do you have a question about the Altec Lansing MRII5124 HF HORN and is the answer not in the manual?
General| Impedance | 8 Ohms |
|---|---|
| Throat Diameter | 1 inch |
| Power Handling | 50W RMS |
| Nominal Coverage | 90° x 40° |
| Mounting | Bolt-on |
Specifies the horn's basic angular coverage at mid-frequencies.
Details how the horn's dispersion changes across its frequency range.
Average horizontal dispersion angle within the 2 kHz to 16 kHz band.
Measures the variation in dispersion angle across frequencies.
References visual representations of sound coverage at various angles.
Quantifies the total sound coverage area at lower frequencies.
Indicates how the horn performs across its specified frequency range.
Measures the horn's ability to focus sound energy.
Average directivity factor over the 2 kHz to 16 kHz frequency range.
The lowest frequency at which the horn provides effective performance.
Measures sound output (dB SPL) for a given input power and distance.
Physical size and measurements of the horn unit.
The physical weight of the horn unit.
Citations for related technical papers and publications.
Key performance requirements including dispersion angles and sensitivity.
Specifies the loudspeaker model number as Altec Lansing MR II 5124.
To Next Page
