Need help?Do you have a question about the Altec Lansing MRII594A HF HORN and is the answer not in the manual?
General| Sensitivity | 108dB (1W/1m) |
|---|---|
| Impedance | 8 Ohms |
| Throat Diameter | 1 inch |
| Horizontal Coverage | 90 Degrees |
| Vertical Coverage | 40 Degrees |
| Mounting | Bolt-on |
| Type | HF Horn |
| Power Handling | 50W RMS |
Specifies the 90° x 40° horn dispersion angle.
Details how dispersion angle changes with frequency.
Average horizontal and vertical dispersion angles for specified range.
References charts illustrating polar response characteristics.
References graphs showing frequency response.
Provides Directivity Index and Factor values.
Indicates the lowest usable frequency for the horn.
Specifies SPL sensitivity measured with a specific driver.
Lists the physical dimensions and weight of the horn.
Overview of the Altec Lansing MR II 594A horn's features and benefits.
Graph showing horizontal and vertical dispersion angle vs. frequency.
Graphs comparing on-axis and off-axis frequency responses.
Shows the unequalized frequency response with a specific driver.
Graphs of Directivity Factor (Q) and Directivity Index (DI) versus frequency.
Polar plots illustrating solid angle coverage at different frequencies.
Charts showing polar response at various frequencies for horizontal and vertical.
Details of the mounting bracket part number and design.
Technical performance criteria for the loudspeaker horn.
To Next Page
