Altec Lansing MX-5020 Connection Guide

Altec Lansing MX-5020

2 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1

MX5020

2

1

3

Other manuals for Altec Lansing MX-5020

User Guide33 pages

Questions and Answers:

S
Stacy PalmerJul 29, 2025
How to fix distorted sound on Altec Lansing Speaker System?
- G
  Gabriella DodsonJul 29, 2025
  If the sound from your Altec Lansing Speaker System is distorted, try turning the VOLUME knob counterclockwise to lower the volume. Also, adjust the computer operating system volume and balance levels to the center as a starting point, then fine-tune the speaker level using the volume control. If you are using WAV files, they might be of poor quality; try using a different sound source such as a music CD.
D
David Johnson MDAug 3, 2025
What to do if no LEDs are lit on my Altec Lansing Speaker System?
- E
  erik83Aug 3, 2025
  If the Altec Lansing Speaker System's LEDs are not lit, first ensure the power is on by turning the VOLUME knob on the right speaker until you hear a click. An LED should light up next to the knob. If that doesn't work, check the AC power cord to ensure it's connected to both the wall outlet and the back of the subwoofer. Also, if you're using a surge protector, make sure it's switched on. Finally, test the wall outlet by plugging in another device to confirm it's working.
M
Melissa OlsonAug 8, 2025
Why is there no sound coming from my Altec Lansing MX-5020 Speaker System?
- H
  Hannah DawsonAug 8, 2025
  If you're not getting any sound from your Altec Lansing Speaker System, make sure the AC power cord is properly plugged into the wall outlet. Also, check that the volume isn't set too low by turning the VOLUME knob clockwise. Verify the 3.5mm stereo cable is securely connected to the correct jacks on your audio source, specifically the “line-out,” “audio-out,” or headphone jack. To rule out issues with your audio source, test the speakers with another device.
J
Jennifer JacobsonAug 13, 2025
What to do if Altec Lansing MX-5020 has crackling sound?
- J
  Jane RodriguezAug 14, 2025
  If your Altec Lansing Speaker System is producing a crackling sound, check all the cables to ensure they are correctly connected to the “line-out” or “audio-out” jack on your sound card or audio source, and not the “speaker-out” jack. If the volume level in your computer's operating system is too high, decrease it. You can also test by unplugging the stereo cable from your current audio source and plugging it into the headphone jack of an alternate audio source, like a Walkman, Discman, or FM radio.
J
Jason GriffinAug 18, 2025
How to troubleshoot Altec Lansing MX-5020 when no LEDs are lit?
- C
  Christopher HuntAug 18, 2025
  If no LEDs are lit on your Altec Lansing Speaker System, start by turning the VOLUME knob on the right speaker until you hear a click sound, which indicates the power is on. An LED should light up next to the knob. Check that the AC power cord is connected to both the wall outlet and the back of the subwoofer. If you're using a surge protector, make sure it's switched on. To ensure the wall outlet is working, plug another device into the same jack.
F
franciskristenAug 23, 2025
Why is my Altec Lansing MX-5020 picking up radio interference?
- J
  James AdkinsAug 23, 2025
  If your Altec Lansing Speaker System is experiencing radio interference, try moving the speakers around until the interference disappears. The speakers might be too close to a radio tower.

Altec Lansing MX-5020 Specifications

General

Speaker System Type	2.1 Speaker System
Frequency Response	40 Hz - 20 kHz
Input Impedance	10 kOhms
Connectivity	3.5mm
Signal-to-Noise Ratio	75 dB
Driver Size	3 inches

Related product manuals

Preview: Altec Lansing M202

Altec Lansing M202

Preview: Altec Lansing 221

Altec Lansing 221

Preview: Altec Lansing 251

Altec Lansing 251

Preview: Altec Lansing ATP3

Altec Lansing ATP3

Altec Lansing 620B

Preview: Altec Lansing 5100

Altec Lansing 5100

Preview: Altec Lansing VS4121

Altec Lansing VS4121

Preview: Altec Lansing BX1220

Altec Lansing BX1220

Preview: Altec Lansing VS2621

Altec Lansing VS2621

Preview: Altec Lansing VS3251

Altec Lansing VS3251

Preview: Altec Lansing BXR1220

Altec Lansing BXR1220

Preview: Altec Lansing A6 Series

Altec Lansing A6 Series