Altec Lansing SOLO MOTION User Manual

3. Charging: In order to charge your speaker's internal battery, connect
one end of the included USB cable to the charging port on
your speaker. Connect the other to a USB port or AC
charging adapter (not included). An LED indicator Light turns
red when charging, and turns o when fully charged.
Charging may take up to 3 hours.
2. For a look at the various buttons on your speaker,
view the graphic below.
5. Listening to Music on Your Speaker
Play/Pause
Press the Play/Pause button to get music from your audio
source to play or pause.
Next/Previous Song
Press and hold the Volume + or Volume- buttons for 2s to
advance to the next song or go back to the previous one.
Increase/Decrease Volume
Press the Volume + or Volume - buttons to increase or
decrease the volume.
6. Using Your Speaker During Phone Calls
Last Number Redialing
Quickly tap on the Answer button twice and the last number that you
dialed will be redialed.
Answering an Incoming Call
To answer an incoming call, quickly press the Answer button.
Ending a Call
To end a call, quickly press the Answer button, and the call will be
disconnected.
Adjusting Volume
By pressing the Volume Up or Volume Down buttons you can increase
or decrease the volume of the phone call.
1. Make sure the following items are
included in your package.
USB Cable
AUX Cable
① Play/Pause
② LED Indicator Lights
③ Volume –
④ Volume +
⑤ Answer
⑥ ON/OFF Switch
⑦ Charging Port
⑧ AUX IN port
4. Pairing Your Speaker With a Bluetooth Phone
-Slide the ON/OFF Switch to the ON position. Your speaker will enter
pairing mode and the LED Indicator Lights will alternately turn blue
and red.
-Go to the Bluetooth Manager of your Bluetooth device. Search
Bluetooth devices and select "Solo motion" to start connecting.
-If required, enter the PIN code "0000" and confirm the entry. Once
paired successful, the speaker will connect to your Bluetooth device
automatically.
Item # IMW120
Quick Start Guide
BLUETOOTH SPEAKER
SOLO MOTION
Indicator
IMW120
1
2
3
4
5
6 7 8

Altec Lansing SOLO MOTION Specifications

General

Battery type	Built-in
USB charging	Yes
Power source type	Battery
Battery life (max)	4 h
Speaker type	-
Driver diameter	69.85 mm
Number of speakers	1
Audio output channels	- channels
Cables included	AUX, USB
Impedance	- Ω
Frequency range	- Hz
RMS rated power	- W
Bluetooth range	10 m
Connectivity technology	Wired & Wireless
Product color	Black
Product design	Rectangle
Volume control	Digital
Recommended usage	Universal

Weight and Dimensions

Depth	44.45 mm
Width	89 mm
Height	60.32 mm
Weight	227 g

Summary

Package Contents and Speaker Overview

Included Items

Lists the items included in the speaker package, such as USB and AUX cables.

Button Functions

Details the functions of each button on the speaker, including Play/Pause, Volume, Answer, and ON/OFF.

Speaker Operation and Connectivity

Charging the Speaker

Instructions on how to charge the speaker's internal battery using the USB cable.

Bluetooth Pairing

Steps to pair the speaker with a Bluetooth device, including PIN code entry if required.

Audio Playback

How to play, pause, skip tracks, and control volume for music playback.

Using Speaker for Phone Calls

Instructions for answering, ending calls, redialing, and adjusting call volume.

Wired Audio Input

Warranty Information and Support

One Year Warranty

Details the terms of the one-year warranty covering defects in material or workmanship.

Warranty Service and Troubleshooting

Information on how to obtain warranty service and troubleshooting assistance.

Technical Support

Contact information and resources for technical support.

Regulatory Compliance

FCC Compliance

Statement regarding FCC rules compliance and potential interference.