Altech ALEC-42090 - 5 Commissioning; Teach-In of the Device; Teach-In to Altech V3 IP Base Station

80
NO
DK
FI
SE
FR
GB
GB
Guidelines 2014/53/EU Telecommunications terminal
equipment
2014/30/EU EMC
2011/65/EU RoHs
5 Commissioning
5.1 Teach-in of the device
In order be integrated into the Altech V3 IP System and to communicate with other
devices, the room control unit Analog must be taught-in first. The room control unit
Analog is taught-in directly to the Altech V3 IP base station, or in conjunction with
the radiator thermostats, to the Altech V3 IP Access Point. In case of direct teach-
in, the configuration is done on the device itself; in case of teach-in via the Access
Point, it is done via the IP app.
5.1.1 Teach-in to Altech V3 IP Base Station
For teach-in, keep a minimum distance of 50 cm between the devices.
The teach-in process can be interrupted by shortly pressing the teach-in key
again. This is confirmed by a short flash in red colour of the device LED.
If no teach-in is performed, the teach-in mode is finished automatically
after 30 seconds.