Need help?Do you have a question about the Altendorf WA 6 and is the answer not in the manual?
Explains the machine's type plate and essential identification data.
Introduces the manual, safety warnings, and essential operating notes.
Details the Declaration of Conformity and directive compliance.
Illustrates and explains compliance symbols (CE, TÜV).
Identifies machine parts and defines key operational terms.
Explains the meaning of hazard and information symbols.
Outlines the machine's intended applications and compatible materials.
Provides overarching safety advice for machine operation.
Guidelines for personal safety, machine condition, and safety devices.
Guidance on safe transport, handling, and site selection.
Detailed steps for assembling machine parts and extensions.
Procedures for electrical hookup and dust extraction connection.
Initial calibration and adjustments for core machine functions.
General guidelines for safe and effective machine use.
Performing various cuts using mitre fence, rip fence, and examples.
Details on motor management, saw blade changes, and adjustments.
Adjusting the scoring blade and information on optional features.
Critical safety rules before performing cleaning or maintenance.
Routine cleaning tasks and schedule for machine parts.
Specific repair and maintenance tasks for users.
Guide to identifying and fixing machine malfunctions and errors.
Detailed technical data on machine components and capabilities.
Policy on spare parts, warranty, and service.
Contact information for Altendorf customer service.
General| Type | Sliding Table Saw |
|---|---|
| Saw Blade Diameter | 300 mm |
| Motor Power | 5.5 kW (7.5 HP) (Optional: 7.5 kW (10 HP) / 11 kW (15 HP)) |
| Max Cutting Height | 120 mm |
| Saw blade tilt | 0° - 45° |
| Saw blade projection max. | 120 mm |
| Max Cutting Height at 90° | 120 mm |
| Max Cutting Height at 45° | 85 mm |
| Voltage | 400 V |
| Frequency | 50 Hz |
To Next Page
