Need help?Do you have a question about the Altendorf WA 80 and is the answer not in the manual?
Specifies materials suitable and unsuitable for cutting with the machine.
Outlines crucial safety rules for machine operation and tool usage.
Outlines crucial safety rules for machine operation and tool usage.
Describes built-in safety features like rip fence and automatic brake.
Details the function and types of safety hoods and riving knives.
Explains how to test emergency stops, limit switches, and other safety components.
Requirements for site selection, foundations, and clearances.
Step-by-step instructions for assembling machine components.
Guidance on connecting the machine to the power supply by qualified personnel.
Information on connecting a dust extraction system to the machine.
Procedures for checking and adjusting basic machine settings like sub-rollers.
General safety practices for operating the sliding table saw.
How to use the cross-slide and crosscut fence for different cutting tasks.
Instructions for setting and using the rip fence for parallel cuts.
Detailed procedures for operating the machine's core functions.
Information on the main switch and motor overload protection.
Steps for starting and stopping the saw drives and extraction system.
Instructions for safely replacing the main saw blade.
To Next Page
General
